Page 10 of 10 FirstFirst ... 678910
Results 271 to 292 of 292
Like Tree7Likes

Thread: How to extract DMT (The Easy & low-cost way)

  1. #271
    Experienced Psychonaut
    Join Date
    2013 Feb
    Posts
    3,320

    Re: How to extract DMT (The Easy & low-cost way)

    celastrus paniculatus is good for Ayurveda... "Basically it's an effective brain tonic." https://www.dmt-nexus.me/forum/defau...posts&m=414718, https://www.dmt-nexus.me/forum/defau...=posts&t=25172.

    Banisteriopsis caapi is a MAO, contains alkaloid similar to those of the Syrian rue (Peganum harmala): harmine, harmaline and tetrahydroharmine.

    And so no, you can't do a dmt trip.

    Read bro', read in this forum for what you want search
    (and you if want, Introduce Yourself ) =D
    dio balla / god dances

    ed è felice / and he's happy


    Albert Einstein:

    «
    Tutto è energia e questo è tutto quello che esiste. Sintonizzati alla frequenza della realtà che desideri e non potrai fare a meno di ottenere quella realtà. Non c’è un’altra via. Questa non è filosofia. Questa è fisica.»

    «Everything is energy and that’s all there is to it. Match the frequency of the reality you want and you cannot help but get that reality. It can be no other way. This is not philosophy. This is physics.»


  2. #272
    Wishful Psychonaut
    Join Date
    2014 Nov
    Posts
    2

    Re: extraction. (DMT)

    how bout dichloromethane as the non polar solvent? I would try to extract NN-DMT from Acacia confusa rb but i'm souspicious on which non polar solvent I should use... It seems to me that naphta fluid has a lot of impurities as other solvents or denaturants. A friend of mine suggested xylene, but I'm not sure also about isomers of xylene and last but not the least it is pretty dangerous

  3. #273
    Wishful Psychonaut
    Join Date
    2014 Nov
    Posts
    3

    Re: extraction. (DMT)

    i would think that naptha is a suitable sovent, fairly clean if i remember right. acacia is just damn tricky, defats are the trick im assuming.

  4. #274
    Wishful Psychonaut
    Join Date
    2014 Nov
    Posts
    2

    Re: extraction. (DMT)

    zippo fluid is petroleum ether, I have dichloromethane in my pantry , but i was afraid of chlorinated tryptamines... On the other side, DCM is a much greater solvent than naphta.

  5. #275
    Wishful Psychonaut
    Join Date
    2014 Nov
    Posts
    3

    Re: extraction. (DMT)

    Quote Originally Posted by Rael View Post
    zippo fluid is petroleum ether, I have dichloromethane in my pantry , but i was afraid of chlorinated tryptamines... On the other side, DCM is a much greater solvent than naphta.

    my naptha evapes clean, im sure dcm is great, but ive no idea what else it would pull besides the spice, for instance xylene pulls a full spectrum of jungle spices. whch might be undesirable for someone who only wantesto pull the shardy stuff.

  6. #276
    Wishful Psychonaut
    Join Date
    2015 Jan
    Posts
    4

    Re: extraction. (DMT)

    I Have questions regarding the process I have used.
    I just started experimenting with some of these extraction processes, and my first attempt was very successful. I didn't measure anything, and had no problems... since then I have tried to follow more precise instruction, and have had terrible results..
    The latest attempt, I ground up like 500g of root bark and put it in a crock pot with salt, water and vinegar....I heated on low for several hours and went through the whole process only to get zero yield... my assumption was the ph wasn't high enough for extraction so I tried again after adding a bunch more lye and today extracted something that looks like dmt, but has no effect.

    my questions are these.
    1 I added a bunch of vinegar, is it possible I added so much I was not able to swing the ph far enough with the lye?
    2 Is it possible for the solution to become too basic? What is the ideal ph?
    3 I read somewhere to make sure the solution is cool before basifying... I did not do this...it was very hot when I basifyed... Could this have affected my outcome?
    4 Why the first pull I pulled nothing, the second pull with more lye I pulled the sticky shit that has no dmt? Will I eventually hit a high enough PH that the dmt will seep through? or did something go terribly wrong, and should I start over from scratch.



    any insight would be awesome. thanks

  7. #277
    Skilled Psychonaut
    Join Date
    2014 Jun
    Location
    Ici et maintenant
    Posts
    614

    Re: extraction. (DMT)

    Quote Originally Posted by Thehangman View Post
    1 I added a bunch of vinegar, is it possible I added so much I was not able to swing the ph far enough with the lye?
    2 Is it possible for the solution to become too basic? What is the ideal ph?
    3 I read somewhere to make sure the solution is cool before basifying... I did not do this...it was very hot when I basifyed... Could this have affected my outcome?
    4 Why the first pull I pulled nothing, the second pull with more lye I pulled the sticky shit that has no dmt? Will I eventually hit a high enough PH that the dmt will seep through? or did something go terribly wrong, and should I start over from scratch.
    1 No, lye is much more powerfull than acetic acid (vinegar). If the solution turned black it should be OK
    2 No. pH=13 is good
    3 Did you put the lye straight in your soup ? It's better to prepare a basic solution (water + lye) and then mix it with the acid soup. And yeah, it's better to cool down before to basify but it should not destroy the DMT
    4 From what are you extracting ?

  8. #278
    Wishful Psychonaut
    Join Date
    2015 Jan
    Posts
    4

    Re: extraction. (DMT)

    Quote Originally Posted by Rasf View Post
    1 No, lye is much more powerfull than acetic acid (vinegar). If the solution turned black it should be OK
    2 No. pH=13 is good
    3 Did you put the lye straight in your soup ? It's better to prepare a basic solution (water + lye) and then mix it with the acid soup. And yeah, it's better to cool down before to basify but it should not destroy the DMT
    4 From what are you extracting ?
    acrb. I haven't been able to extract anything out of this batch. Would the heat destroy it? Ive read plenty about acid boils so o I doubt it. I assumed I just hadn't hit a high enough ph yet, but I had added like a whole jar of lye.

  9. #279
    Skilled Psychonaut
    Join Date
    2014 Jun
    Location
    Ici et maintenant
    Posts
    614

    Re: extraction. (DMT)

    Your bark could be the problem.

    And, if you're not experimented, it's better to practice with smaller amount (50g) until you master the process. Like this when something turn wrong you don't loose to much.

  10. #280
    Wishful Psychonaut
    Join Date
    2015 Jan
    Posts
    4

    Re: extraction. (DMT)

    Quote Originally Posted by Rasf View Post
    Your bark could be the problem.

    And, if you're not experimented, it's better to practice with smaller amount (50g) until you master the process. Like this when something turn wrong you don't loose to much.

    I personally don't believe its the bark. I ordered a digital ph meter and will at least make sure the ph is high enough.. if so, I will just start over.

    Is it better do you suspect to use powder from the start? or use ground up shredded bark?
    Thanks for your input by the way.

  11. #281
    Skilled Psychonaut
    Join Date
    2014 Jun
    Location
    Ici et maintenant
    Posts
    614

    Re: extraction. (DMT)

    Heat destroys DMT but in water you don't go over 100°C (still, it's better to simmer than to boil the bark).
    Adding lye straight in the bark solution "could" destroy some of the DMT. I read it but i don't know if it's true.

    I have any experience with acacia so i'm not sure, but with MHRB when you add enough lye the solution become black and it means the right pH is reached (it's good to add a bit more of lye to be sure). pH meter is a good thing to have .

    I worked with powder and shredded bark and i didn't notice difference. The quality of bark is the most important.


    What do you use as solvent to pull DMT ?
    What temperature during pulls ?
    How do get the magic out of it ? Evaporation, freeze precipitation ?
    Last edited by Rasf; 31st January 2015 at 23:23.

  12. #282
    Wishful Psychonaut
    Join Date
    2015 Jan
    Posts
    4

    Re: How to extract DMT (The Easy & low-cost way)

    So I managed to finally make a successful pull out of it, and it was exactly what I expected... I think I added so much vinegar to begin with I couldn't get the proper ph with the lye... I read somewhere very cursory about alkalinity and it seemed that at the solution was just to damn acidic.... anyways, I think what finally did it was splitting up the solution and adding more water, thus changing the alkalinity... I don't know, Im not a chemist by any means, so thats probably way off..... but it worked anyways..
    Thanks very much for your help, its frustrating dealing with this kind of stuff and having no one to ask...

    So the pull before this, I pulled the red goo that totally seemed like the dmt I'm used to, but with nothing in it... this pull has by far been the cleanest yield I have made... so I'm happy.

    Thanks!

  13. #283
    Wishful Psychonaut
    Join Date
    2015 Oct
    Location
    odinmaa
    Posts
    4

    Re: How to extract DMT (The Easy & low-cost way)

    SWIM have been extracting (a/b) dmt few times with good success and is now wondering if aluminum coated lye (stex) is ok for extracting?SWIM have aluminum coated lye home (got 5kg jar of it from his work) and would like to know if its ok to use it for the purpose?
    Last edited by patatas; 11th October 2015 at 16:26.

  14. #284
    Wishful Psychonaut
    Join Date
    2015 Oct
    Posts
    1

    Re: How to extract DMT (The Easy & low-cost way)

    Where can you buy DMT on line

  15. #285
    Wishful Psychonaut
    Join Date
    2015 Oct
    Location
    odinmaa
    Posts
    4

    Re: How to extract DMT (The Easy & low-cost way)

    why buy when can make it yourself?alot good techs round.follow them and youre good.and remember,be careful with lye

  16. #286
    Wishful Psychonaut
    Join Date
    2015 Nov
    Posts
    1

    Re: extraction. (DMT)

    If anyone can help me out with this stuff, I'm a complete beginner. Can someone drop me their email? I'd just like a step by step guide on how to actually acquire and take this stuff.

  17. #287
    Wishful Psychonaut
    Join Date
    2016 Apr
    Posts
    2

    Re: How to extract DMT (The Easy & low-cost way)

    asks if I use an electric laboratory stirrer I can shake constantly for days that's good or bad? It can affect the performance of the plant? if I use the agitator This would reduce the time in which separations are made and someone has any idea approximately how low time?

  18. #288
    Wishful Psychonaut
    Join Date
    2016 Oct
    Posts
    2

    Re: extraction. (DMT)

    Hey guys, came across this terrible quality video extraction guide on youtube, and was wondering if anyone with experience could validate it as a usable guide or not. (In the videos description it states that they should have finished the extraction after evaporating the vinegar 12:11...) https://www.youtube.com/watch?v=e2nKQwhyqEM Thanks a heap )

  19. #289
    Wishful Psychonaut
    Join Date
    2016 Oct
    Posts
    2

    Re: How to extract DMT (The Easy & low-cost way)

    Hey do you think you could validate this extraction method I came across on youtube? https://www.youtube.com/watch?v=e2nKQwhyqEM

    Thanks

  20. #290
    Wishful Psychonaut
    Join Date
    2017 Jan
    Posts
    1

    Re: How to extract DMT (The Easy & low-cost way)

    Ok, I am new to all this but I have done some pretty extensive research on the subject of Gramine and I think I have found a way to separate most of it from the Dmt found in phalaris arundinacea and other strains. Gramine is insoluble in water and has a higher boiling point that Dmt by 7 degrees C. Dmt boils in salt form at 160 c and Gramine boils at 167 c. So Im thinking that after the final extraction of dmt you could put it in a makeshift condenser,( an air tight canning jar or pyrex mixing bowl with an air tight lid with a hole cut in it that allows a hose to travel a bowl of ice water and out into another jar) with alkaline water at about 8-9 ph which would cause the Dmt to be water soluble and evaporate with the water and condense in another container. Like I said i am new but the method sounds like it would work. In theory

  21. #291
    Wishful Psychonaut
    Join Date
    2017 Apr
    Posts
    1

    Re: extraction. (DMT)

    hey guys! was wondering if you had a mhrb supplier that you know is quality? the mhrb supplier i go through is currently down for some reason. thanks! also to help with your problem i would check out willy myco on instagram and youtube ive been following him awhiel and he knows alot about this subject and has helped me achive very great yeilds. thanks guys!
    Last edited by ethansalive; 12th April 2017 at 01:35.

  22. #292
    Meuble Sludge's Avatar
    Join Date
    2011 Sep
    Location
    mon cul
    Posts
    10,807

    Re: How to extract DMT (The Easy & low-cost way)

    I stopped buying MHRB on the Internet because there is a large possibility that a fucking lot of peope buy it and that it is a destructive culture /harvest where it comes from. A good option would be local culture in a greenhouse.
    Mes trips reports : The Death of Utopia, The Begining of the Dream
    Tableau d'information sur les combos de produits risqués

    Le lâcher prise, c'est accepter de redevenir un enfant.
    ----------------------------
    Ce qui importe avec l’expérience psychédélique, ou plus généralement spirituelle, ce n’est pas la vérité que l’on croit toucher du doigt, mais bien le chemin qu’elle nous fait parcourir sur notre rapport au soi, aux autres et à la vie.

Page 10 of 10 FirstFirst ... 678910

LinkBacks (?)

  1. 14th April 2014, 23:55
  2. 24th March 2014, 18:43
  3. 22nd March 2014, 00:29
  4. 13th March 2014, 01:31
  5. 31st May 2012, 01:46

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •